(주)드림

Air Pressure Dispenser

  • All-in-one in Full Automation

    SuperΣCMⅢ - V2 / V5

    - Automatic compensation
    - Fast tact time, High capacity
    - Down running-cost

  • Supports by compensation

    SuperΣXⅢ - V2 / V5

    - For viscosity liquid
    - Down r- Fast tact time, High capacity
       unning-cost

  • Supports viscosity fluctuation

    ML-808GX

    - Equipped Air pulse stabilizer
    - Equipped with RS-232C communication

  • Digital dispenser for viscosity

    ML-5000XⅡ

    - Space saving more than 65%
    - Including Air pulse stabilizing circuit (PAT.)
       and realizes superior Discharge accuracy
    - Machines that support RoHS and CE

  • High performance ECO dispenser

    SMART SHOT MS-1 / MS-1D

    - Cut power consumption by half
    - Discharge accuracy is 130% compared
       to our conventional products
    - Ultra-lightweight and compact
    - Machines that support RoHS and CE

  • Digital control valve controller

    VALVE MASTER ME-5000VT

    - Machines that support RoHS and CE

  • Digital control spray controller

    SPRAY MASTER ME-5000SP

    - Machines that support RoHS and CE

  • Digital control pump controller

    PUMP MASTER ME-5000P

    - High precision stable dispense of pump
       / valve is possible
    - By digital control, we realize superior
       operability and reproducibility

Mechanical Dispenser

  • Non-contact jet dispenser

    AeroJet

    - For medium and high visconsity
    - Reduces production cycle time
    - Shoot liquids of medium and high viscosity
    - It can dispense material on the nano-level
    - Machines that support RoHS and CE

  • Ultra-high-speed and Non-contact JET dispenser

    SuperJet

    - Super-high-speed Max: 1, 200Hz
    - Less than small amount 0.5nL/shot
    - High Visconsity +_ 1%
    - Synchronized speed ® (PAT.P

  • Non-contact jet dispenser

    Hotmelt Superjet

    - Complete 3D seal dispensing by
       stable consecutive dispense
    - The overwhelming durability of
       consumables
    - Resolution cleaning operation is smooth

  • High efficiency screw dispenser

    SCREW MASTER3

    - Cost of material reduction which
       "uses up" materials till the last
    - Simple syringe change
    - Synchronized speed ® function
       correspondence

  • Low viscosity non-contact jet dispenser

    CyberJet2

    - Apply liquid materials of super low
       viscosity in high precision
    - High-speed dispensing of flux and
       dry type lubricant.
    - CE marking, EURoHS conformity
       version is line-up

  • Capacity measuring digital control

    MEASURING MASTER MPP-1

    - CE marking, EURoHS conformity
       version is line-up

  • Large capacity plunger system

    MEASURING MASTER MPP-3

    - Large increase in plunger pump capacity
    - An original no step-out plunger
       mechanism is adopted. 
    - CE marking, EURoHS conformity
       version is line-up

  • High speed gasket dispenser

    MOHNO MASTER

    - Good at high-speed gasket dispensing
       with uniform line width and high-aspect
        ratio
    - Synchronized speed ® function
       correspondence

  • Small amount fixed-quantity dispenser

    NANO MASTER SMP-Ⅱ

    - Small amount dispense of 1/10, 000 ml
      smallest with low viscosity liquid material
    - Dripping is canceled by original plunger
      mechanism and case back function
    - Micro syringe Equipped is possible.
      (special order correspondence)

  • Super small amount fixed-quantity dispenser

    NANO MASTER SMP-Ⅲ

    - Super small amount dispense of
      1/1, 000000 ml smallest in low viscosity
      liquid materials.
    - Dripping is canceled by original plunger
      mechanism and case back function
    - Consecutive dispense of small amount
      is possible

  • High-precision for tiny quantity of pump

    FILL MASTER

    - High precision small amount filling is
      realized by original digital control
      plunger method.

Tubing dispenser

  • Rotary tubing dispenser

    MT-410

    - Easy maintenance and check as the
      rotor can be disassembled
    - Machines that support RoHS and CE

  • Keyboard-type tubing dispenser

    MK-201

    - Dripping, bubble generating is prevented
       by special mechanism
    - The superior durability reduces running cost
    - We prepare dispense pen with remote
       switch for Manually (optional)

Desktop Robot

  • Desktop type dispensing robot

    SHOTMASTER SX series

    - 800mm/s Highway movement
      of class top-level
    - Synchronized speed ® function Equipped

  • Desk gate type robot

    SHOTMASTER ΩX series

    - Stable movement high-speed as for
      heavy tool and work
    - Synchronized speed ® function Equipped

  • PC control image recognition

    IMAGE MASTER 350PC

    - Automatically executes and monitors
      the production cycle
    -  New development edge detection
       function Equipped

  • PC control image recognition

    IMAGE MASTER 350PC Smart XMΩX

    - New development MX series
    - Automation acceptable

  • Software for editing the dispensing pattern

    MuCAD

    - Make dispensing programs with simple
      mouse controls
    - Can load and edit DFX and Gerber data
    - Includes a wafer mapping function

Valve

  • Piston control valve

    PCV-12

    - Most suitable for mount the automatic
      machine at chine type, Compact-size,
     light weight.

  • Coating valve

    CV-10

    - Edge and edge face neatly
      Dispensing
    - By low flow quantity design, film
      dispensing is possible.
    - Stroked valve by micrometer
      calipers Equipped
    no number management is possible

  • Capacity measuring type fixed-quantity valve

    PPV-5

    - Dispense stable regardless of
      temperature change of liquid
      materials in high precision

  • Needle valve-type fixed-quantity dispense valve

    NAV-1

    - Needle valve-type fixed-quantity
      dispense valve
    - Maintenance is easy by incorporating
      syringe, and using
    - Low running cost

  • Diaphram valve

    DCV-2(전자식) / DCV-3(공압식)

    - Most suitable for low viscosity,
      small amount dispense of anaerobic
      liquid materials

  • Fluid drip prevention valve

    TCV-S3

    - Fluid drip prevention valve which shows
      extremely superior seal characteristics
      by original valve mechanism
    - It is most suitable for liquid materials
      of viscosity in from low viscosity.

  • High pressure valve

    HPV-1NC

    - The resolution, maintenance is easy
      in needle valve-type one

  • Needle control valve

    NCV-12s

    - It is most suitable for mount the
      automatic machine at microminiature
      chine type, light weight

  • Needle control valve

    NCV-10

    - Dispense stable in liquid materials
      with filler
    - UV liquid materials correspondence
      type are line-up.

  • Piston control valve

    PCV-5

    - 1 port that conversion from syringe
      method is easily Type /PCV-5-1P is line-up

  • Needle control valve

    NCV-17/NCV-17-L

    - It is most suitable for small amount
      dispense of liquid materials with UV, filler
    - Liquid materials invasion to Moving
      parts is prevented by diagram structure
    - Large flow quantity type of approximately
      3 times is line-up flow quantity

  • Twin-fluid spray valve

    SV-6 series / SVM-6LX

    - Prevents splashing by low-pressure
      atomization
    - Supports multiple heads
    - Full system line-up

  • Needle control valve

    NCV-7DV

    - Fixed-quantity dispense of liquid
      materials with filler is possible
    - By diaphragm structure,
      it is liquid materials to Moving parts
      We prevent invasion

Peripheral device

  • Fan-type temperature control

    PELTIER MASTER TCU-05Ⅱ/TB-C-P-F

    - Temperature abnormality warning
      Output signal is supplied
    - It is air compressor-free for fan method

  • Air-type temperature control

    PELTIER MASTER TCU-05Ⅱ/TB-C-P

    - Temperature abnormality warning
      Output signal is supplied
    - Clean room fits by air method control

  • Resistance thermometer bulb-type

    THERMO MASTER

    - control dispense fluctuations by superior
      temperature stability and back up
      dispensing quality improvement strongly
    - Preset temperature unit 0.1 degrees Celsius,
      measured temperature, preset temperature
      at the same time

  • Simple syringe filling unit

    FILLING MATE

    - Containers various from syringe
      to large-capacity barrel ni correspondence.

  • Automatic weighing-type syringe filling device

    AUTO FILLING MASTER

    - It is available for each syringe size

  • 2 liquid measurement mixture

    TAM-93C

    - Prevent bubble mixture to materials
      and realize stable dispense
    - Simple washing by senkiyomeekioshiso
      after use.

  • Simplified mold 2 liquid mixing dispense device

    DUAL MASTER

    - Part mixed by use of static mixer
      no washing is easy
    - It can be put only mixer on automatic
      machine.

  • Rotating Dispenser

    CIRCLE MASTER

    - Dispensing available for both inner
      and outer circumferences.
    - Cope with change of work diameter
    - It can store dispenser under the body
      (optional)

  • Stirring unit

    MIX MASTER

    - Stirring allows syringe, liquid
      materials in cartridge thoroughly

  • Centrifugal action removes bubbles from syringe

    AWATRON 3

    - Equipped digital timer
    - Set syringe which you put liquid materials in,
    Simple control that only pushes switch

Liquid tank

  • Tank for high viscosity

    SST

    - Wide from low viscosity to highly viscous
      liquid agent Correspondence
    - Customization to application of visitor
      Possibility

  • Straight one-touch tank

    SOT

    - Customization to application of visitor
      Possibility

  • One-touch tank

    OTT

    - Liquid materials direct injection
      expression tank
    - Customization to application of visitor
      Possibility

  • Gallon tank

    GAT

    - Be superior to handling ability at light
      weight; for conveyance Convenience
    - Cannot open cover at the time of
      pressurization Safety structure.

  • Internal container

    SBP

    - As liquid materials does not contact the
      tank body directly

Nozzle & Needle

  • Standard metal needles with high versatility

    SNA

    - Metal needles which use SUS needles
      with excellent durability
    - It even supports discharge under high
      temperature conditions
    - It is available for solvents and UV liquids

  • Plastic needle

    PN

    - Economical and disposable needles

  • Double thread screwed plastic needle

    DPN

    - Needle Double thread screw design to
      enable syringe wearing certain safely

  • Curve needle

    CPN

    - It is supported wide use by two kinds
      of angles and abundant variation

  • PTFE nozzle

    TN

    - It is effective to particularly anaerobic
      liquid material

  • PTFE nozzle working under SUS guide

    TN-SUSG

  • Double thread screw taper nozzle

    TPND

    - Double thread screw design allows the
      user to mount the needle on the syringe

  • Soft needle

    PPN

    - Distinguishable gage by needle part color

  • Super-fine nozzle

    FN

    - Very small RBI dispensing and super
      high-definition drawing dispensing are
      realized by systematization with
      MUSASHI dispenser

  • Precision-solid nozzle

    SHN

    - Outstanding flow characteristic
      by taper shape

  • Precision nozzle

    HN

    - Dispensing stable in liquid materials
      with filler
    - Suitable in low viscosity liquid materials
    - Needle Double thread screw
      Specifications which airtightness is high

  • Sharp needle

    SPN

    - Needle Double thread screw design
      to enable syringe wearing certain safely

  • Brush nozzle

    BN

    - Needle Double thread screw design
      to enable syringe wearing certain safely

  • Multi point Dispensing needle

    DN

    - Needle made in SUS discharging
      two points - four points in one dispense
      at the same time

  • Nozzle with stopper

    - Needle : stainless steel
    - Body : stainless steel
    - Stopper : stainless steel

  • Special nozzle

  • Sleet nozzle

  • Multi-nozzle

    MN

    - Multi point Dispensing is possible in
      one dispense at the same time
    - It supports various dispensing patterns
      in custom order

  • Nozzle kit

Syringe & Accessories(for Syringe)

  • Clear syringe

    PSY-E

    - polypropylene

  • UV block syringe

    PSY-EU-OR

    - polypropylene

  • Color syringe

    PSY-E-PG

    - polypropylene

  • Heat-resistant syringe

    PSY-FH

    - polypropylene

  • Syringe for mounter

    PSY-P

    - polypropylene

  • Antistatic syringe

    PSY-E-SEP

    - polypropylene

Syringe & Accessories(for Adoptor tube)

  • Adater tube for tube clamp

    - polyacetal

  • Adater tube for plastic connector

    - polyacetal

  • Side connection adapter tube

    - polyacetal

  • Air connector tube filter

  • O-ring for adaptor tube

    - fluoro rubber / silicone rubber
      / nitrile rubber / perfluoro / elastomer

Syringe & Accessories(for Plunger)

  • Plunger

    - Reduction of liquid materials to
      discharge liquid materials in syringe
      without waste till the last

Syringe & Accessories(for Syringe cap)

  • Syringe head cap

    - polypropylene

  • Syringe tip cap

    - polypropylene

  • Cap for protection

    - polypropylene

Syringe & Accessories(for Stand)

  • The syringe stands

  • The syringe stands H type

Cartridge & Barrel

  • Barrel cartridge

  • Components of Barrel

  • Tube cartridge

  • Sealant cartridge

Specialized equipment

  • Reagent spotting sysytem

    JET SPOTTER

    - Reagent spotting system
       supporting microarray

  • Automatic dispensing system

    MICROMASTER

    - Fluid bottle mountable without repacking.
    - Fluid level detecting function for a fluid
      bottle to be mounted.

  • Desktop type Filling Injection system

    PIPETMASTER

    - Choose chip to use by quantity
      of Filling Injection.

  • Automatic multi-channnel dispensing

    PIPETMASTER

    - Fully automatization of pipet tip
      mounting,chemical suction,multi-channel
      dispensing,and pipet tip removal

  • Spotting system for biochip manufacturing

    SPOT MASTER

    - Equipped with 10nL micro
      dispensing head

  • Automatic titration system

    NANO MASTER NANO-1

    - 1 nl의 초미량 토출에 실적을 자랑하는
      디스펜서 SMP-Ⅲ를 탑재a- It carries dispenser SMP-III proud
      of the results to super small amount
      dispense of 1nl

  • For making optical components

    OPTOmini

    - Available with up to 99 main programs
    - Support for extensive dispensing
      applications

  • Dispensing, UV irradiation robot

    Application & UV Irradiating Robot

    - Repetition locational accuracy
      of ±0.01mm
    - Robot prepares for in total five kinds in
      work-space envelope

  • Screw fastening Robot

    Screw Clamping System

    - Prepare various error handling in advance
    - Simplified installation of screw
      fastening program with support
      software MuDRIVE

  • The grease jet dispense system

    GREASE JET

    - High-precision constant volume
      dispensing to the complex internal
      mechanism

  • Desktop type Substrate coating device

    FCD300

    - Without scattering, we realize high-speed
      thin layer coating
    - Medium size Substrate (250*330mm)
      correspondence

Head
Office
103-610, 88, Sinwon-ro, Yeongtong-gu,
Suwon-si, Gyeonggi-do,Republic of Korea

TEL 82(0)31 695 6030 FAX 82 (0)31 695 6045 EMAIL dream@dreamcorp.co.kr
Gumi
office
406, 350-27, Gumi-daero, Gumi-si,
Gyeongsangbuk-do, Republic of Korea

TEL 82(0)54 461 6030 FAX 82 (0)54 461 6033
Vietnam
office
24th floor, Block B Song Da Building, Pham Hung Street,
My Dinh 1 Ward, Nam Tu Liem District, Hanoi
TEL +84-243-200-9410 FAX 84-243-200-9470
E-MAIL dream_vina@dreamcorp.co.kr


President Park, Si-hi Copyright © DREAM Corporation. All Rights Reserved.